1 Zone Fire Alarm Control Panel

1 Zone conventional fire alarm panel is designed based on EN54 part 2＆4 standard.

It is the heart of the fire automatic alarm system, which can realize centralized control,

can supply power to the detectors, manual call point, bell etc.

One zone of the panel can match with 20 pieces fire alarm system accessories.

The 1 Zone fire alarm panel has the following characteristics:

• Analogue conventional detector inputs: 20 detectors or MCPs maximum.
• Smaller size and easier for installation, but all-around.
• Maximum number of bells per CIE: 4 Bells.
• relay-outputs: FIRE/FAULT.
• High-capacity batteries: 12V2.3Ah*2, over 8h for stand-by use.
• Automatic power switchover: mains power and stand-by power.
• Succinct functional buttons: friendly user interface for easy operation and recognition.
• Fault supervision and notification: inputs, sounder, mains/batteries.
• Evacuation: man-made fire alarm condition on panel.
• Silence: sounders and panel buzzer.
• Extensible application for GSM: inform user anytime by mobile telephone.
  
  

  AC INPUT	220VAC 50/60Hz
  DC OUTPUT	24VDC typical
  Voltage for MCU	5V for MCU
  Current at 24VDC from PSE	450mA standby current
  Maximum current from PSE	1A except batteries charge
  Batteries current	1.85A maximum, current limited
  Auxiliary output	24VDC +/- 10%, 100 mA max, current limited, monitored
  Batteries	2*12V/ 2.3Ah sealed lead acid gel, self-regulated *
  Battery low-voltage protection	21V
  Detectors connection allowed each zone	20 (except MCPs)
  Zone alarm current	6mA minimum/ 27mA maximum
  Sounder output	2*0.75A maximum
  Fire Relay	1A/30VDC maximum
  Fault Relay	1A/30VDC    maximum
  Communication protocol	2 wires RS485 bus system
  EOL resistor for zone	6.8K 1W
  EOL resistor for outputs	6.8K 1W
  Fuse for AC Power	1 A/ 250V glass tube fuse 5 X 20mm
  Fuse on DC Power	1A/ 250V glass tube fuse 5 X 20mm
  Environmental	Class A temperature range: -5 to 50°C  Humidity: 5 to 95% RH, non-condensing
  Terminal blocks rating	All terminals rated for 12 to18 AWG (0.75 to 2.5 mm2)